Ip Netstream Export Host - 3Com 8807 Command Reference Manual

Netstream Configuration Commands 873
tos-destination-prefix: ToS-destination-prefix aggregation which classifies the
stream according to the Netstream's destination AS number, destination mask
length, destination prefix and outbound interface index keywords.
tos-prefix: ToS-prefix aggregation which classifies the stream according to the
Netstream's ToS, source AS number, source prefix, source mask length, destination
AS number, destination mask length and destination prefix keywords.
tos-protocol-port: Tos-protocol-port aggregation which classifies the stream
according to the Netstream's ToS, protocol type, source port and destination port
keywords.
tos-source-prefix: ToS-source-prefix aggregation which classifies the stream
according to the Netstream's ToS, source prefix, source mask length and source
interface index keywords.
Description
Use the ip netstream aggregation command to enter Netstream aggregation
view.
In aggregation view, you can enable/disable the aggregation function, and set the
source interface, destination IP address and destination port number of the version
8 UDP packet.
Related command: enable, ip netstream export host, and ip netstream
export source.
Example
# Enter Netstream AS aggregation view.
<SW8800> system-view
[SW8800] ip netstream aggregation as
[3Com-aggregation-as]

ip netstream export host

Syntax
ip netstream export host ipaddress udpport
undo ip netstream export host ipaddress
View
System view, aggregation view
Parameter
ip-address: IP address of the destination host of Netstream statistics export
packets, expressed in dotted decimal.
udpport: UDP port number of the destination host of Netstream statistics export
packets.
Description
Use the ip netstream export host command to configure the destination host IP
address and UDP port number of the Netstream statistics export packet.