3Com 8807 Command Reference Manual page 333

Description
Use the display radius command to view the configuration information of all
RADIUS scheme or a specified one.
By default, This command outputs the configuration information about the
specified or all the RADIUS scheme.
Related command: radius scheme.
Example
# Display the configuration information of all the RADIUS scheme.
<SW8800> display radius
------------------------------------------------------------------
SchemeName =system
Primary Auth IP =127.0.0.1
Primary Acct IP =127.0.0.1
Second Auth IP =0.0.0.0
Second Acct IP =0.0.0.0
Auth Server Encryption Key= 3com
Acct Server Encryption Key= 3com
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts
Retry sending times of noresponse acct-stop-PKT =500
Username format
Data flow unit
Packet unit
------------------------------------------------------------------
Total 1 RADIUS scheme(s). 1 listed
Table 42 Description of output information of the display radius command
Field
SchemeName
Index
Type
Primary Auth IP/ Port/ State
Primary Acct IP/ Port/ State
Second Auth IP/ Port/ State
Second Acct IP/ Port/ State
Auth Server Encryption Key
Acct Server Encryption Key
TimeOutValue (seconds)
Retry Times
Permitted send realtime PKT
failed counts
Retry sending times of
noresponse acct-stop-PKT
Username format
Data flow unit
RADIUS Protocol Configuration Commands
Port=1645
Port=1646
Port=1812
Port=1813
Description
The name of Radius Scheme
The index of Radius Scheme
The type of Radius Scheme
The IP address of the primary authentication server/the
number of the access port/the current state of the server
The IP address of the primary accounting server/the number
of the access port/the current state of the server
The IP address of the secondary authentication server/the
number of the access port/the current state of the server
The IP address of the secondary accounting server/the
number of the access port/the current state of the server
The login password of the authentication server
The login password of the accounting server
Response timeout value of the RADIUS server
The maximum transmitting times of RADIUS request packet.
The maximum times of sending real-time no-response
accounting packet
The maximum retry times of buffered no-response
accounting stop packet
The format of the username
The unit of data flow
331
Index=0 Type=3com
State=active
State=active
State=block
State=block
=5
=without-domain
=Byte
=1