Disconnect - 3Com 8807 Command Reference Manual

FTP Client Commands 995

disconnect

Syntax
disconnect
View
FTP Client view
Parameter
None
Description
Use the disconnect command to disconnect FTP Client side from FTP server side
without exiting FTP client side view.
This command terminates the control connection and data connection with the
remote FTP Server at the same time.
Example
# Terminate connection with the remote FTP Server and stays in FTP Client view.
<SW8800> ftp
[ftp] disconnect
ftp Syntax
ftp [{ ipaddress | host-name} [ port ] ]
View
User view
Parameter
ipaddress: IP address of the remote FTP Server.
port: Port number of remote FTP Server.
Host-name: Name of the remote FTP Server, a string which is 1 to 30 characters
long.
Description
Use the ftp command to establish control connection with the remote FTP Server
and enter FTP Client view.
Example
# Connect to FTP Server at the IP address 1.1.1.1
<SW8800> ftp 1.1.1.1
get Syntax
get remotefile [ localfile ]
View
FTP Client view