Aggregate - 3Com 8807 Command Reference Manual

BGP Configuration
Commands

aggregate

BGP C
ONFIGURATION
n
When a switch runs a routing protocol, it can perform the router functions. A
router that is referred to in the following or its icon represents a generalized router
or an Switch 8800 Family series routing switch running routing protocols. To
improve readability, this will not be described in the other parts of the manual.
For the configuration of VPN instance, refer to the MPLS module in 3Com Switch
8800 Family Series Routing Switches Operation Manual.
Syntax
aggregate address mask [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy
route-policy-name ]*
undo aggregate address mask [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy
route-policy-name ]*
View
BGP view
Parameter
address: Address of the aggregated route in dotted decimal format.
mask: Network mask of the aggregated route in dotted decimal format.
as-set: Creates a route with segment of AS_SET.
detail-suppressed: Only advertises the aggregated route.
suppress-policy route-policy-name: Suppresses the specific route selected and
does not advertise part of the specific routes.
origin-policy route-policy-name: Selects the originate routes used for
aggregation.
attribute-policy route-policy-name: Sets the attributes of the aggregated route.
27
BGP Configuration Commands
C
OMMANDS
497