448
C
25: OSPF C
C
HAPTER
ONFIGURATION
OMMANDS
ospf mib-binding
Syntax
ospf mib-binding process-id
undo ospf mib-binding
View
System view
Parameter
process-id: ID of an OSPF process, in the range 1 to 65,535. If no OSPF process is
specified, the default process ID 1 applies.
Description
Use the ospf mib-binding command to bind the MIB operation to the specified
OSPF process.
Use the undo ospf mib-binding command to restore the default.
When OSPF protocol enables the first process, it always binds MIB operation to
this process. You can use this command to bind MIB operation to another OSPF
process. Execute the undo ospf mib-binding command if you want to cancel the
setting. OSPF will automatically re-bind MIB operation to the first process that it
enables.
By default, MIB operation is bound to the first enabled OSPF process.
Example
# Bind MIB operation to OSPF process 100.
[SW8800] ospf mib-binding 100
# Restore the default MIB binding.
[SW8800] undo ospf mib-binding
ospf mtu-enable
Syntax
ospf mtu-enable
undo ospf mtu-enable
View
Interface view
Parameter
None
Description
Use the ospf mtu-enable command to enable the interface to write MTU value
when sending DD packets.
Use the undo ospf mtu-enable command to restore the default settings.
Need help?
Do you have a question about the 8807 and is the answer not in the manual?
Questions and answers