Domain - 3Com 8807 Command Reference Manual

316 C 21: AAA
HAPTER AND

domain

RADIUS/HWTACACS P
ROTOCOL
IP address:
MAC address:
Total 1 local user(s) Matched,1 listed.
Table 41 Description of output information of the display local-user command
Field Description
State State
Service Type Mask Service type mask
Idle Cut Idle cut switch
AccessLimit Limit on the number of access connections
Current AccessNum Number of current accesses
Bind location Whether to be bound with port
VLAN ID VLAN that the user belongs to
IP address IP address of the user
MAC address MAC address of the user
Syntax
domain { isp-name | default { disable | enable isp-name } }
undo domain isp-name
View
System view
Parameter
isp-name: Specifies an ISP domain name. The name is expressed with a character
string not exceeding 24 characters, excluding "/", ": ", "*", "? ", "<", and ">".
default enable isp-name: Enables the default ISP domain specified by isp-name.
default disable: Disables the configuration of the default ISP. Restores the default
ISP domain to "system".
Description
Use the domain command to configure an ISP domain or enter the view of an
existing ISP domain.
Use the undo domain command to cancel a specified ISP domain.
By default, a domain named as system has been created in the system. The
attributes of system are all default values.
ISP domain is a group of users belonging to the same ISP. Generally, for a
username in the userid@isp-name format, taking gw20010608@3com163.net as
an example, the isp-name (i.e.3com163.net) following the @ is the ISP domain
name. When 3Com Series Switches control user access, as for an ISP user whose
username is in userid@isp-name format, the system will take userid part as
username for identification and take isp-name part as domain name.
C C
ONFIGURATION OMMANDS
Disable
Disable