Display Qos-Vlan Traffic-Limit; Display Qos-Vlan Traffic-Priority - 3Com 8807 Command Reference Manual

244 C 17: Q S C
HAPTER O OMMANDS
display qos-vlan
traffic-priority
Description
Use the display qos-vlan traffic-limit command to display the parameter
configuration for traffic limit in VLAN, including the configuration information
about related ACL and policing actions.
Related command: traffic-limit and traffic-params.
Example
# Display the parameter configuration of traffic limit in VLAN.
<SW8800> display qos-vlan traffic-limit
Vlan 1 traffic-limit
Inbound:
There is no configuration.
Outbound:
There is no configuration
Vlan 2 traffic-limit
Inbound:
Matches: Acl 2000 rule 3
Committed Information Rate: 8192 Kbps
Committed Burst Size: 10000 byte(s)
Excess Burst Size: 20000 byte(s)
Peak Information Rate: 0 Kbps
Exceed action: drop
Outbound:
There is no configuration.
Syntax
display qos-vlan [ vlan-id ] traffic-priority
View
Any view
Parameter
vlan-id: ID of a VLAN, in the range of 1 to 4094.
Description
Use the display qos-vlan traffic-priority command to display the priority
marking configuration in VLAN, including the ACL associated with the traffic
priority marking, the type and value of the priority marking.
Related command: traffic-priority.
Example
# Display the priority marking configuration in VLAN.
<SW8800> display qos-vlan traffic-priority
Vlan 1 traffic-priority
Inbound:
There is no configuration.
Outbound:
There is no configuration
Vlan 2 traffic-priority
Inbound:
Matches: Acl 2000 rule 1
Priority action: remark-policed-service, untrusted, dscp: 13, cos: 6,
local-precedence: 6, drop-priority: 1
Outbound:
There is no configuration.
running (Action-type: Eacl, Destination slot: 3)
running (Action-type: Eacl, Destination slot: 3)