Display Vlan-Acl-Member-Ports - 3Com 8807 Command Reference Manual

290 C 19: VLAN-ACL C
HAPTER
display
vlan-acl-member-ports
C
ONFIGURATION OMMANDS
Example
# Synchronize ACL configuration of VLAN 5 to Ethernet3/1/1 port manually.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface Ethernet3/1/1
[3Com-Ethernet3/1/1]port can-access vlan-acl vlan 5
Syntax
display vlan-acl-member-ports vlan vlan-id
View
Any view
Parameter
vlan-id: VLAN ID, in the range of 1 to 4,094.
Description
Use the display vlan-acl-member-ports command to view in this VLAN the ports
with the ACL configuration of the VLAN synchronized to.
When a port is added to a VLAN, you may fail to synchronize the VLAN-ACL
configuration of the VLAN because the resources are not enough or user-defined
flow templates are applied to ports. You can use this command to view the ports
to which the ACL rule configured on the specified VLAN is applied.
Example
# View the ports to which the ACL rule configured on VLAN 5 is applied.
<SW8800>display vlan-acl-member-ports vlan 5
Vlan-acl member port(s):
Ethernet2/1/11
Ethernet2/1/22
Ethernet2/1/25
Ethernet2/1/20
Ethernet2/1/23
Ethernet2/1/40
Ethernet2/1/21
Ethernet2/1/24