Display Acl Remaining Entry - 3Com 8807 Command Reference Manual

display acl remaining
entry
The matched times here refer to the software matched times, that is, the matched
times of the ACLs that needed to be processed by CPU. You can collect hardware
matched times value by using the traffic-statistic command.
Example
# Display contents of all ACLs.
<SW8800> display acl config all
Link ACL 4000, 1 rule,
rule 0 permit ingress any egress any
Basic ACL traffic-of-host, 1 rule,
rule 1 deny source 10.1.1.1 0 time-range 3com-3com(0 times matched) (Active)
Syntax
display acl remaining entry slot slotid
View
Any view
Parameter
slot slotid: the ID of the specified slot.
Description
Use the display acl running-packet-filter command to display the total number
of ACL rules that are applied on the specified card.
Example
# Display the total number of ACL rules that are applied on the slot 5.
<SW8800> display acl remaining entry slot 5
Slot: 5
Resource Total Reserved
Type Number Number
--------------------------------------------------------------------------
METER 256
METER 256
RULE 1024
RULE 1024
ACTION 1024
ACTION 1024
Table 28 The description of the information on display
Field
Resource Type
Total Number
Reserved Number
Configured Number
Remaining Number
Start Port Name, End Port Name The names of the start port and the end port
Configured Remaining
Number Number
0 0 256
0 0 256
0 0 1024
0 0 1024
0 0
0 0 1024
Description
Resource type
METER: the resource is the flow meter resource;
RULE: the resource is the rule resource;
ACTION: the resource is action resource
The total number of ACL rules that are supported by the
hardware
The number of the reserved ACL rules
The number of the ACL rules that have been configured
The number of the remaining ACL rules
ACL Commands
Start End
Port Name Port Name
GE5/1/1 GE5/1/12
GE5/1/13 GE5/1/24
GE5/1/1 GE5/1/12
GE5/1/13 GE5/1/24
1024 GE5/1/1 GE5/1/12
GE5/1/13 GE5/1/24
217