Display Vlan - 3Com 8807 Command Reference Manual

Table 7 Description on the fields of the display interface Vlan-interface command
Field
The Maximum Transmit Unit Maximum Transmit Unit (MTU)

display vlan

Syntax
display vlan [ vlan-id to vlan-id | all | static | dynamic ]
View
Any view
Parameter
vlan-id: Displays information of the specified VLAN.
all: Displays information of all VLANs.
static: Displays information of VLANs created statically by the system.
dynamic: Displays information of VLANs created dynamically by the system.
Description
Use the display vlan command to view related information about the specified or
all VLANs.
If vlan-id or all is specified, information of specified VLAN or all VLANs is displayed.
It includes: VLAN ID, VLAN type (dynamic or static), whether the routing function
has been enabled on this VLAN (if enabled, the main IP address and mask will be
displayed), VLAN description, and the ports VLAN contains.
If parameter is not specified, information of the VLANs that has been created is
displayed. If the parameter dynamic or static is selected, information of VLANs
created dynamically or statically by the system is displayed.
Related command: vlan.
Example
# Display the information about VLAN2.
[SW8800] display vlan 2
VLAN ID: 2
VLAN Type: static
ARP proxy disabled
Route interface: not configured
Description: VLAN 0002
Tagged
Untagged Ports:
Ethernet2/1/1
Table 8 Description on the fields of the display vlan 2 command
Field
VLAN ID
VLAN Type
Route interface
Description
Ports: none
Ethernet2/1/2
Description
VLAN ID
Configuration type of VLAN: either dynamic or static
Whether the route interface exists
VLAN Configuration Commands
Ethernet2/1/3
79