50
PoE Configuration
Commands
display poe interface
P
E C
O
ONFIGURATION
Syntax
display poe interface [ interface-type interface-num ]
View
Any view
Parameter
interface-type interface-num: Port type and port number; refer to Command
Manual - Port for details.
Description
Use the display poe interface interface-type interface-num command to display
the PoE status of a specific port on the switch.
Use the display poe interface command without any option to display the PoE
status of all the PoE-capable ports on the switch.
Example
# Display the PoE status of the port GigabitEthernet3/1/1.
<SW8800> display poe interface GigabitEthernet3/1/1
Port power status
Port power mode
Port PD class
port power priority
Port max power
Port current power
Port remaining power
Port average power
Port peak power
Port current
Port voltage
C
OMMANDS
:delivering
:signal
:2
:high
:16800 mW
:552 mW
:16248 mW
:717 mW
:1196 mW
:13 mA
:53.7 V