Info-Center Source - 3Com 8807 Command Reference Manual

info-center source

<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] info-center snmp channel 6
Syntax
info-center source { modu-name | default } channel { channel-number |
channel-name } [ debug { level severity | state state }* | log { level severity | state
state }* | trap { level severity | state state }* ]*
undo info-center source { modu-name | default | all } channel {
channel-number | channel-name }
View
System view
Parameter
modu-name: Module name.
Table 145 gives the details.
Table 145 The module name field
Module
name Description
8021X 802.1X module
ACL ACL (access control list) module
ADBM MAC address management module
ARP ARP (address resolution protocol) module
BGP BGP (border gateway protocol) module
CFM Configuration file management module
CMD Command module
default Default setting of all modules
DEV Device management module
DHCP Dynamic host configuration protocol module
DIAGCLI Diagnosis module
DNS Domain name server module
DRVMPLS MPLS (multiprotocol label switching) drive module
DRV_L2 Layer 2 drive module
DRV_L3 Layer 3 drive module
DRV_L3MC Layer 3 multicast module
MPLS MPLS (multiprotocol label switching) drive module
DRVQACL QACL drive module
DRVVPLS VPLS (virtual private LAN service) drive module
ETH Ethernet module
FTPS FTP server module
HA High availability module
HABP HABP (3Com authentication bypass protocol) module
HWCM 3Com configuration management MIB module
Information Center Configuration Commands 1015