Parity - 3Com 8807 Command Reference Manual

Logging in to Switch Commands 55
Description
Use the modem timer answer command to configure the timer answer from
off-hook to carrier detected when establishing the call in connection.
Use the undo modem timer answer command to restore the default timeout
value.
This command can only be performed in AUX user interface view.
Example
# Set the timer answer of AUX 0 to 45s.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] user-interface aux 0
[3Com-ui-aux0] modem timer answer 45

parity

Syntax
parity { even | mark | none | odd | space }
undo parity
View
User interface view
Parameter
even: Configures to perform even parity.
mark: Configures to perform mark parity.
none: Configures not to perform parity.
odd: Configures to perform odd parity.
space: Configures to perform space parity.
Description
Use the parity command to configure the parity mode on the user interface.
Use the undo parity command to restore the default parity mode.
This command can only be performed in Console and AUX user interface view.
By default, the mode is set to none.
Example
# Set mark parity on the AUX port.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] user-interface aux 0
[3Com-ui-aux0] parity mark