Display Mac-Address Vsi - 3Com 8807 Command Reference Manual

8800 series
Hide thumbs Also See for 8807:
Table of Contents

Advertisement

776
C
42: VPLS C
C
HAPTER
ONFIGURATION
OMMANDS
event: Enables debugging for event notification among modules.
Loadshare: Enables debugging for load sharing.
Description
Use the debugging mpls l2vpn command to enable individual kinds of L2VPN
debugging.
Use the undo debugging mpls l2vpn command to disable the corresponding
debugging.
By default, all L2VPN debugging is disabled.
Example
# Enable debugging for L2VPN errors.
<SW8800> debugging mpls l2vpn error

display mac-address vsi

Syntax
display mac-address vsi [ vsi-name ] [ peer peer-address | local | vlan-interface
vlan-interface-number ] ] [ dynamic | static ] [ count ]
View
Any view
Parameter
peer: Specifies the peer IP address.
peer-address: Peer IP address.
local: All local MAC addresses.
vlan-interface: Specifies the VLAN interface whose MAC address corresponds
with the locally bound VSI.
vlan-interface-number: VLAN interface number.
vsi: Specifies the VSI to be displayed.
vsi-name: VSI Name.
dynamic: Displays only dynamic VSI MAC forwarding entries.
static: Displays only static VSI MAC forwarding entries.
count: Displays only the number of VSI MAC forwarding entries.
Description
Use the display mac-address vsi command to display VSI MAC forwarding
information.. You can display the MAC forwarding entries of either all VSIs or a
specific VSI.
Related command: vsi, mac-address static.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

88148810

Table of Contents