Port - 3Com 8807 Command Reference Manual

254 C 17: Q S C
HAPTER O OMMANDS

port

If the mirroring-group has been configured, the system will prompt "The
mirroring-group has been configured!"
Syntax
port interface-list
undo port interface-list
View
Port group view
Parameter
interface-list: Ethernet port list to be added to a port group or to be deleted from
a port group, in the format of interface-lis t= { interface-type interface-number [ to
interface-type interface-number ] }&<1-n>. interface-type indicates a port type
and interface-number indicates a port number. The port number after the
keyword to must be greater than or equal to that before the keyword to. &<1-n>
indicates that you can input the preceding parameters for up to n times. n
indicates the maximum number of ports allowed to be added to a port group.
Description
Use the port command to add a port to a port group.
Use the undo port command to add remove a port from a port group.
For common interface cards except for the XP4 card, confider the following issues:
Do not add the ports of different cards to the same port group. Do not add the
■
same port to multiple port groups at the same time.
Do not add aggregated ports in the port group. If a port in the port group
■
needs to be aggregated, the port must quit the port group first. The port
configuration is overwritten by that of the primary port in the aggregation
group.
After a port is added to the port group, the port configuration is overwritten by
■
that of the port group. You cannot apply the ACL rule as per port.
When the port group is null, it is not allowed to configure QACL. After all the
■
members quit the port group, the QACL configuration of the port group is
remained. When a new port joins the port group, QACL will be applied to the
port automatically.
Example
# Add Ethernet3/1/1, Ethernet3/1/2, and Ethernet3/1/3 to port group 1.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800]port-group 1
[3Com-port-group1] port Ethernet3/1/1 Ethernet3/1/2 Ethernet3/1/3
The original rule on the port will be deleted.
Are you sure?[Y/N] y
Add port Ethernet3/1/1...
Add port Ethernet3/1/2...
Add port Ethernet3/1/3...