Terminal Trapping - 3Com 8807 Command Reference Manual

Information Center Configuration Commands 1023
Parameter
None
Description
Use the terminal monitor command to enable the terminal display functions.
Use the undo terminal monitor command to disable the terminal display
functions.
By default, the system enables the functions of debugging/log/trap information on
the console and disable them on the terminal.
This command only takes effect on the current terminal where the commands are
input. The debugging/log/trap information can be output to the current terminal,
beginning in user view. When the terminal monitor is shut down, no
debugging/log/trap information will be displayed in local terminal, which is equals
to having performed undo terminal debugging, undo terminal logging,
undo terminal trapping commands. When the terminal monitor is enabled, you
can use terminal debugging / undo terminal debugging, terminal logging /
terminal logging and terminal trapping / undo terminal trapping
respectively to enable or disable the corresponding functions.
Example
# Disable the terminal monitor.
<SW8800> undo terminal monitor

terminal trapping

Syntax
terminal trapping
undo terminal trapping
View
User view
Parameter
None
Description
Use the terminal trapping command to enable terminal display function of trap
information.
Use the undo terminal trapping command to disable this function.
By default, this function is enabled.
Example
# Enable the terminal display function of trap information.
<SW8800> terminal trapping