Supervlan - 3Com 8807 Command Reference Manual

You can still add/remove ports to/from a VLAN after the mapping relationship is
■
established.
The undo subvlan command cancels all mapping relationships between the
■
specified super VLAN and all sub VLANs. If you do not specify the sub-vlan-list
argument. Otherwise, this command cancels the mapping relationship
between the specified sub VLAN and the specified super VLAN.
Related command: display supervlan.
Example
# Establish mapping relationship between super VLAN 10 and sub VLANs with
VLAN IDs of 3, 4, 5 and 9.
[3Com-vlan10] subvlan 3 to 5 9

supervlan

Syntax
supervlan
undo supervlan
View
VLAN view
Parameter
None
Description
Use the supervlan command to set a VLAN to be a super VLAN.
Use the undo supervlan command to cancel the super VLAN type of a VLAN.
By default, no type is configured for a VLAN.
Note that:
You cannot add ports to a super VLAN.
■
The ARP proxy of the interfaces of a VLAN are enabled automatically and
■
cannot be disabled when the VLAN is set to be a super VLAN.
The default VLANs cannot be super VLANs.
■
Related command: display supervlan.
Example
# Set VLAN 2 to be a super VLAN.
[3Com-vlan2] supervlan
Super VLAN Configuration Commands 93