Debugging Ha; Display Switchover State - 3Com 8807 Command Reference Manual

44
HA Configuration
Commands

debugging ha

display switchover state

HA C
ONFIGURATION
C
OMMANDS
Syntax
debugging ha { all | event | message | state }
undo debugging ha { all | event | message | state }
View
User view
Parameter
all: All HA debugging switches.
event: HA batch backup or tamed event debugging switch.
message: Debugging switch for messages received or sent by HA.
state: HA state machine state information debugging switch.
Description
Use the debugging ha command to enable HA debugging.
Use the undo debugging ha command to disable HA debugging.
By default, HA debugging is disabled.
Example
# Enable all the HA debugging.
<SW8800> debugging ha all
Syntax
display switchover state [ slot-id ]
View
Any view
Parameter
slot-id: Slot number of master or slave fabric.
_HA_C
ONFIGURATION