Reset Stop-Accounting-Buffer; Retry Stop-Accounting - 3Com 8807 Command Reference Manual

HWTACACS Configuration Commands 361
Parameter
accounting: Clears all the HWTACACS accounting statistics.
authentication: Clears all the HWTACACS authentication statistics.
authorization: Clears all the HWTACACS authorization statistics.
all: Clears all statistics.
Description
Use the reset hwtacacs statistics command to clear HWTACACS protocol
statistics.
Related command: display hwtacacs.
Example
# Clear all HWTACACS protocol statistics.
<SW8800> reset hwtacacs statistics
reset Syntax
stop-accounting-buffer
reset stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name
View
User view
Parameter
hwtacacs-scheme hwtacacs-scheme-name: Configures to delete the
stop-accounting requests from the buffer according to the specified HWTACACS
scheme name. The hwtacacs-scheme-name specifies the HWTACACS scheme
name with a character string not exceeding 32 characters, excluding"?".
Description
Use the reset stop-accounting-buffer command to clear the stop-accounting
requests that have no response and are buffered on the switch.
Related command: stop-accounting-buffer enable, retry stop-accounting,
display stop-accounting-buffer.
Example
# Delete the buffered stop-accounting requests that are related to the HWTACACS
scheme "3com".
<SW8800> reset stop-accounting-buffer hwtacacs-scheme 3Com

retry stop-accounting

Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
HWTACACS view