Display Bgp Routing-Table Label - 3Com 8807 Command Reference Manual

712 C 40: BGP/MPLS VPN C
HAPTER
display bgp
routing-table label
C
ONFIGURATION OMMANDS
Description
Use the display bgp vpnv4 command to view the VPN address in BGP table.
Example
# Display all the BGP VPNv4 routing tables.
<SW8800> display bgp vpnv4 all routing-table
Flags: # - valid
D - damped
In/out As
Dest/mask
----------------------------------------------------------------
Route Distinguisher:1.1.1.1:1 (VPN instance:v1)
#^ 1.0.0.0 0.0.0.0
Routes total: 1
Syntax

display bgp routing-table label

View
Any view
Parameters
None
Description
Use the display bgp routing-table label command to view the routing
information and label information in the BGP routing table. For an unlabelled
common IPv4 route, the label in the displayed information is null. If you use the
display bgp routing-table address [ mask ] command to view the BGP routing
information, the label information will be displayed if the route has a label.
Example
# View the BGP routing information.
<SW8800> display bgp routing-table label
Flags: # - valid
D - damped
Dest/Mask
--------------------------------------------------------------
#^ 9.0.0.1/32
# View the detailed BGP routing information.
<SW8800> display bgp routing-table 9.0.0.1
BGP routing table entry information of 9.0.0.1/32
Age : 00:00:32
From : local
State : valid, sourced, active,
Nexthop : 0.0.0.0
Origin : INC
As-path : (null)
^ - active
H - history
Next-hop Med Local-pref
^ - active
H - history
Next-Hop
0.0.0.0 1024/-
I - internal
S - aggregate suppressed
label
-/1024
I - internal
S - aggregate suppressed
In/out
Label
path