Arp Enable Size - 3Com 8807 Command Reference Manual

820 C 46: ARP T S C C
HAPTER ABLE IZE ONFIGURATION OMMANDS
undo arp max-aggregation-entry
View
System view
Parameter
max-aggnum: Maximum number of ARP entries for aggregation port (that is,
aggregation ARP entries) supported by each card. This argument counts in K (1K =
1024).
Description
Use the arp max-aggregation-entry command to configure the maximum
number of aggregation ARP entries that can be supported by each card of the
switch.
Use the undo arp max-aggregation-entry command to restore the default
maximum number of aggregation ARP entries supported by each card.
You can configure the maximum number of ARP entries to be 4K, 5K, 6K, 7K or
8K modules 3C17525, 3C1757, 3C17530, and 3C17531. For all other modules,
the maximum number of ARP entries is 4K.
By default, each card supports up to 1K aggregation ARP entries.
Example
# Configure the maximum number of aggregation ARP entries that can be
supported by each card of the switch to 8K.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800]arp max-aggregation-entry 8
The configuration won't be enables until the system is rebooted.

arp enable size

Syntax
arp enable size { 4 | 64 }
undo arp enable size
View
System view
Parameter
4: Configures the maximum number of ARP entries of the whole switch to 4K (1K
= 1024).
64: Configure the maximum number of ARP entries of the whole switch to 64K.
Description
Use the arp enable size command to configure the maximum number of ARP
entries that can be supported by the whole switch.