59
FTP Client Commands
binary
FTP&TFTP C
C
OMMANDS
ascii
Syntax
ascii
View
FTP Client view
Parameter
None
Description
Use the ascii command to configure data transmission mode as ASCII mode.
By default, the file transmission mode is ASCII mode.
Perform this command if the user needs to change the file transmission mode to
default mode.
Example
# Configure to transmit data in the ASCII mode.
<SW8800> ftp
[ftp] ascii
200 Type set to A.
Syntax
binary
View
FTP Client view
Parameter
None
Description
Use the binary command to configure file transmission type as binary mode.
Example
# Configure to transmit data in the binary mode.
ONFIGURATION