Display Link-Aggregation Interface - 3Com 8807 Command Reference Manual

154 C 11: E
HAPTER THERNET
display link-aggregation
interface
L A C
INK GGREGATION ONFIGURATION
Table 22 Description on the fields of the display link-aggregation verbose command
Field
Port State
Local:
Port Status Priority Flag
Oper-key Link-Status
Remote:
Actor Partner Priority Flag
Oper-key SystemID
Syntax
display link-aggregation interface interface-type interface-number [ to
interface-type interface-number ]
View
Any view
Parameter
interface { interface-type interface-number [ to interface-type interface-number ]:
Specifies a port or ports. Without the parameter to, one port is specified. You can
specify multiple contiguous ports with the parameter to. interface-type specifies
port type and interface-number specifies port number. For more information, see
the parameter item for the interface command.
Description
Use the display link-aggregation interface command to view detailed link
aggregation information at a designated port, including aggregation group ID for
the port, port priority, operation key, flag, peer information (system ID, port
number, port priority, operation key, flag).
Note that since the manual aggregation group cannot get the information of the
peer end, every item of the peer end is displayed as 0, which does not indicate the
actual status of the peer system.
Example
# Display detailed link aggregation information of link aggregation group.
<SW8800> display link-aggregation interface ethernet2/1/1
Ethernet2/1/1:
Attached AggID: 1
Local:
Port-Priority: 32768, Oper key: 1, Flag: 0x00
Remote:
System ID: 0x0, 0000-0000-0000
Port Number: 0, Port-Priority: 0, Oper-key: 0, Flag: 0x00
Received LACP Packets: 0 packet(s), Illegal: 0 packet(s)
Sent LACP Packets: 0 packet(s)
Table 23 Description on the fields of the display link-aggregation interface command
Field
Attached AggID
C
OMMANDS
Description
Port state
Other information of the local end, including member ports,
port state, port priority, flag bit , operation key and link status.
Detailed information about the peer device, including local
port, peer port index, port priority, flag, operation key and
device ID
Description
Aggregation group ID for the specified port