Display Vpls Connection - 3Com 8807 Command Reference Manual

display vpls connection

Example
# Display the MAC forwarding entries of VSI 3Com.
<SW8800> display mac-address vsi
MAC ADDR STATE
0004-0000-005b dynamic
--- 1 mac address(es) found
Syntax
display vpls connection [ vsi vsi-name ] [ peer peer-ip ] [ up | down | block ] [
verbose | statistics ]
View
Any view
Parameter
vsi: Specifies a VSI.
vsi-name: VSI name.
peer: Specifies a peer PE.
peer-ip: IP address of the peer PE.
up: Displays only the information of the Pseudowires (PWs) in Up state.
down: Displays only the information of the Pseudowires in Down state.
block: Displays only the information of the Pseudowires in Block state.
verbose: Displays the details of Pseudowires.
statistics: Displays the statistics of Pseudowires.
Description
Use the display vpls connection command to display the Pseudowire
information of the VSI. You can query the information of statistics of Pseudowires
by any combination of VSI name, peer IP address, and Pseudowire state.
Example
# Display the VC information of VSI 3Com.
<SW8800> display vpls connection vsi 3com
VSI name : 3com
MTU : 2000
Status : open
VCID EncapType PeerAddr
200 vlan 2.2.2.2
100 ethernet 3.3.3.3
2 total connection(s):0 up, 0 block, 2 down
Table 98 Brief description on the fields of a VC
Field Description
VSI name VSI name
VPLS Configuration Commands
3Com
VPN ID PEER
150 Vlan-interface10
---
state Lcl-Label/Rmt-Label TnlType/TnlID
down 131514/0
down 131515/0
777
AGING TIME
AGING
LSP/1
LSP/2