Arp Static - 3Com 8807 Command Reference Manual

808 C 45: ARP C C
HAPTER ONFIGURATION OMMANDS
View
VLAN view
Parameter
None
Description
Use the arp proxy enable command to enable ARP proxy function.
Use the undo arp proxy enable command to disable ARP proxy function.
By default, ARP proxy function is disabled.
You can configure these commands for a VLAN and sub-VLAN. If you enable ARP
proxy for a VLAN, the device with ARP proxy function directly forwards received
ARP requests in the VLAN. If you enable ARP proxy for a sub-VLAN, the device
with ARP proxy function directly forwards received ARP requests in other
sub-VLANs which belong to the same super-VLAN and also have the ARP proxy
function enabled.
Related command: display arp proxy.
Example
# Enable ARP proxy function for VLAN 2.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] vlan 2
[3Com-vlan2] arp proxy enable

arp static

Syntax
arp static ip-address [ mac-address [ vlan-id { interface-type interface-number } ] [
vpn-instance vpn-instance-name ]
undo arp ip-address
View
System view
Parameter
ip-address: IP address of the ARP mapping entry.
mac-address: MAC address of the ARP mapping entry, whose format is H-H-H ( H
indicates a hexadecimal number).
vlan-id: VLAN to which the static ARP entry belongs, in the range of 1 to 4094.
interface-type interface-number: The type and number of the port to which the
static ARP entry belongs. For the specific parameter values, refer to the description
on the interface command in Ethernet Port Command Manual.
vpn-instance vpn-instance-name: VPN instance name in MPLS VPN.