Import-Route - 3Com 8807 Command Reference Manual

BGP Configuration Commands 521
Description
Use the group group-name command to establish a peer group.
Use the undo group group-name command to cancel the configured peer group.
The default type of BGP peer group is internal.
Rather than existing alone, a BGP peer must belong to a peer group. Therefore,
when creating a BGP peer, you must create a BGP peer group first and then add
the peer into the group.
All member peers must use the same update policy as the peer group, but they
may use different ingress policies.
Example
# Create an IBGP group named test.
[3Com-bgp] group test

import-route

Syntax
import-route protocol [ med med-value | route-policy route-policy-name ]
undo import-route protocol
View
BGP view
Parameter
protocol: Specifies source routing protocols which can be imported, which include
direct, ospf, ospf-nssa , ospf-ase, rip, isis and static at present.
med med-value: Specifies the MED value loaded by an imported route, ranging
from 0 to 4294967295.
route-policy route-policy-name: Specifies a route-policy used for filtering
imported routes of other protocols. It can consist of numbers and letters with a
length ranging from 1 to 19.
Description
Use the import-route command to import routes of other protocols.
Use the undo import-route command to cancel importing routes of other
protocols.
By default, BGP does not import routes of other protocols.
Note that when BGP is importing other routing protocols, BGP does not import
their default routes.
Example
# Import routes of RIP.
[3Com-bgp] import-route rip