Poe Legacy Enable Slot - 3Com 8807 Command Reference Manual

PoE Configuration Commands 883
undo poe enable slot slot-num
View
System view
Parameter
slot-num: Number of the slot where the module resides.
Description
Use the poe enable slot command to enable PoE on a module.
Use the undo poe enable slot command to disable PoE on a module.
By default, PoE is disabled on a module.
The switch checks that the total power of the current system is sufficient before
allowing you to enable PoE on the module by using this command.
Example
# Enable PoE on the module in slot 2.
[SW8800]poe enable slot 2
# Disable PoE on the module in slot 2.
[SW8800]undo poe enable slot 2

poe legacy enable slot

Syntax
poe legacy enable slot slot-num
undo poe legacy enable slot slot-num
View
System view
Parameter
slot-num: Number of the slot where the module resides.
Description
Use the poe legacy enable slot command to enable the module to detect the
compatibility of the PD connected to it.
Use the undo poe legacy enable slot command so that the module does not
detect the compatibility of the PD connected to it.
When detecting the compatibility of PDs, the module can detect and power the
PDs incompatible with the 802.3af standard.
By default, the module does not detect the compatibility of the PD connected to it.
c
CAUTION: Detecting an incompatible device slows down the detection and
decreases system performance; therefore, you are not recommended to enable
compatibility detection if the device connected is 802.3af-compliant.