Stp Reset-Arp - 3Com 8807 Command Reference Manual

MSTP Configuration Commands 201
Example
# Enter MST region view.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] stp region-configuration
[3Com-mst-region]

stp reset-arp

Syntax
stp reset-arp { enable | disable }
undo stp reset-arp
View
System view, Ethernet port view
Parameter
None
Description
Use the stp reset-arp enable command to enable the function of clearing
dynamic ARP entries on the switch or on the port.
Use the stp reset-arp enable command to disable the function of clearing
dynamic ARP entries on the switch or on the port.
Use the undo stp reset-arp command to restore the default value of a dynamic
ARP entry.
n
If you enable the function of clearing dynamic ARP entries in system view, the ARP
entries of all the ports will be deleted. If you enable the function of clearing
dynamic ARP entries in port view, only the ARP entries of the specified port will be
deleted.
Example
# Enable the function of clearing dynamic ARP entries in system view.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] stp reset-arp enable
# Disable the function of clearing dynamic ARP entries in system view.
[SW8800] stp reset-arp disable
# Enable the function of restoring the default value of a dynamic ARP entry in
system view.
[SW8800] undo stp reset-arp
stp instance root Syntax
secondary
stp [ instance instance-id ] root secondary [ bridge-diameter bridgenum ] [
hello-time centi-senconds ]