Reset Vrrp Statistics; Vrrp Authentication-Mode - 3Com 8807 Command Reference Manual

reset vrrp statistics

vrrp
authentication-mode
Syntax
reset vrrp statistics [ vlan-interface interface-number [ virtual-router-ID ] ]
View
User view
Parameter
statistics: VRRP statistics.
vlan-interface interface-number: Interface name.
virtual-router-ID: VRRP virtual router ID, ranging from 1 to 255.
Description
Use the reset vrrp statistics command to clear the statistics information about
VRRP.
If the interface name and virtual router ID are not specified, the statistics
information about all the virtual routers on the switch will be cleared. If only the
interface name is specified, the statistics information about all the virtual routers
on the interface will be cleared. If the interface name and virtual router ID are
specified, the statistics information about the specified virtual router on the
interface will be cleared.
Example
# Clear the VRRP statistics on the switch.
<SW8800> reset vrrp statistics
Syntax
vrrp authentication-mode authentication-type authentication-key
undo vrrp authentication-mode
View
VLAN interface view
Parameter
authentication-type: Authentication type. There are following types:
simple: Indicates to perform simple character authentication.
■
md5: Indicates to perform the AH authentication with MD5 algorithm.
■
authentication-key: The key cannot exceed 8 characters.
Description
Use the vrrp authentication-mode command to configure the authentication
type and key of a specified VRRP virtual router.
Use the undo vrrp authentication-mode command to reset the authentication
type and key of a specified VRRP virtual router.
VRRP Configuration Commands 793