Arp Timer Aging; Debugging Arp - 3Com 8807 Command Reference Manual

ARP Configuration Commands 811
You can add multiple ports one by one by setting the multicast static ARP entry. To
view the configuration, use the display arp multi-port command.
Related commands: reset arp, display arp, debugging arp, arp static.
Example
# In an ARP entry, the IP address is 10.10.10.98, and the MAC address is
0150-0098-0098. Add the outgoing ports Ethernet 6/1/1, Ethernet 6/1/2 and
Ethernet 6/1/3 to the ARP entry.
[SW8800] arp static 10.10.10.98 0150-0098-0098 20 multi-port Ethernet 6/1/1
[SW8800] arp static 10.10.10.98 0150-0098-0098 20 multi-port Ethernet 6/1/2
[SW8800] arp static 10.10.10.98 0150-0098-0098 20 multi-port Ethernet 6/1/3

arp timer aging

Syntax
arp timer aging aging-time
undo arp timer aging
View
System view
Parameter
aging-time: Aging time of dynamic ARP aging timer, which is in the range of 1 to
1440 minutes. By default, the aging time is 20 minutes.
Description
Use the arp timer aging command to configure the dynamic ARP aging timer.
Use the undo arp timer aging command to restore the default dynamic ARP
aging timer.
Related command: display arp timer aging.
Example
# Configure the dynamic ARP aging timer to 10 minutes.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] arp timer aging 10

debugging arp

Syntax
debugging arp { error | info | packet }
undo debugging arp { error | info | packet }
View
User view
Parameter
error: ARP error debugging.
info: ARP mapping table and information management debugging.