Display Debugging; Display Fiber-Module - 3Com 8807 Command Reference Manual

display debugging

display fiber-module

The maximum time value supported by this command is 23:59:59 9999/12/31.
Related command: clock datetime.
Example
# View the current system date and time.
<SW8800> display clock
18:36:31 beijing Sat 2002/02/02
Time Zone : beijing add 01:00:00
Summer-Time : bj one-off 01:00:00 2003/01/01 01:00:00 2003/08/08 01:00:00
Table 150 Description on the fields of the display clock command
Field
18:36:31 beijing Sat 2002/02/02
Time Zone : beijing add 01:00:00
Summer-Time : bj one-off 01:00:00
2003/01/01 01:00:00 2003/08/08 01:00:00
Syntax
display debugging [ interface interface-type interface-number ] [ module-name
]
View
Any view
Parameter
interface-type: Interface type supported by the switch, including Ethernet,
GigabitEthernet, AUX, and Vlan-interface.
interface-number: Interface number.
module-name: Module name.
Description
Use the display debugging command to display debugging that has been
enabled.
You can execute the display debugging to view the specific debugging that has
been enabled. If the command is executed without any parameter specified, the
system will display all debugging that has been enabled.
Related command: debugging.
Example
# Display all debugging that has been enabled.
<SW8800> display debugging
Multicast packet forwarding debugging switch is on
Syntax
display fiber-module [ interface-type interface-number ]
System Status and System Information Query Commands
Description
Current system time
Configured time zone information
Configured summer time information
1029