Display Ip Routing-Table Acl - 3Com 8807 Command Reference Manual

382 C 23: S
HAPTER TATIC
display ip routing-table
R C C
OUTE ONFIGURATION OMMANDS
4.4.4.1/32
127.0.0.0/8
127.0.0.1/32
Table 48 Description of the fields of the display ip routing-table command
Field
Destination/Mask Destination address/Mask length
Protocol
Pre
Cost
Nexthop
Interface
Syntax
acl
display ip routing-table acl { acl-number | acl-name } [ verbose ]
View
Any view
Parameter
acl-number: The number of basic ACL, ranging from 2000 to 2999.
acl-name: The basic ACL name introduced via names.
verbose: With the parameter, this command displays the verbose information of
both the Active and Inactive routes that passed filtering rules. Without the
parameter, this command only displays the summary of the Active routes that
passed filtering rules.
Description
Use the display ip routing-table acl command to view the route filtered through
specified basic access control list (ACL).
This command is used in track display of route policy to display the route that
passed the filtering rule according the input basic ACL number or name.
The command is only applicable to display the route that passed basic ACL
filtering rules.
Example
# Display the summary of Active routes that are filtered through basic acl 2000.
[SW8800] acl number 2000
[3Com-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255
[3Com-acl-basic-2000] rule deny source any
[3Com-acl-basic-2000] display ip routing-table acl 2000
Routes matched by access-list 2000:
Summary count: 4
Destination/Mask
10.1.1.0/24 DIRECT
10.1.1.2/32 DIRECT
DIRECT 0
DIRECT 0
DIRECT 0
Description
Routing protocol
Routing preference
Cost
Next hop address
Output interface, through which the data packet destined for the
destination network segment is sent
Protocol Pre
0 0 10.1.1.2
0 0 127.0.0.1
0 127.0.0.1
0 127.0.0.1
0 127.0.0.1
Cost Nexthop
Vlan-interface1
InLoopBack0
InLoopBack0
InLoopBack0
InLoopBack0
Interface