Display Debugging Arp; Gratuitous-Arp-Learning Enable - 3Com 8807 Command Reference Manual

816 C 45: ARP C
HAPTER ONFIGURATION

display debugging arp

gratuitous-arp-learning
enable
C
OMMANDS
<SW8800> display arp timer aging
Current ARP aging time is 10 minute(s)
You can see that the ARP aging time is 10 minutes.
Syntax
display debugging arp
View
Any view
Parameter
None
Description
Use the display debugging arp command to display the ARP packet debugging
information.
Example
# Display the ARP packet debugging information.
<SW8800> display debugging arp
ARP packet debugging switch is on, Source IP Address is 8.8.8.1, Destination
IP Address is 8.8.8.26, Source MAC Address is 000a-ebf2-51a8
Table 104 Description on the fields of the display debugging arp command
Field
ARP packet debugging
switch
Source IP Address
Destination IP Address
Source MAC Address
Syntax

gratuitous-arp-learning enable

undo gratuitous-arp-learning enable
View
System view
Parameter
None
Description
Use the gratuitous-arp-learning enable command to enable the gratuitous ARP
packet learning function.
Use the undo gratuitous-arp-learning enable command to disable the
gratuitous ARP packet learning function.
Description
State of the switch for ARP packet debugging
Source IP address of an ARP packet
Destination IP address of an ARP packet
Source MAC address of an ARP packet