Private-Group-Id Mode Standard - 3Com 8807 Command Reference Manual

AAA Configuration Commands 323
By default, an AAA scheme specifies to perform local authentications.
The scheme command specifies a RADIUS/HWTACACS scheme for the current ISP
domain. The specified scheme must be an existing scheme.
You can use the radius-scheme radius-scheme-name local or hwtacacs-scheme
hwtacacs-scheme-name local command to specify to perform local
authentications in case the Radius Server or the Tacacs Server fails to respond
properly. That is, local authentications are performed only when the Radius Server
or the Tacas Server fails.
If you specify local authentications to be the primary scheme, then only local
authentications are performed and you cannot adopt RADIUS and HWTACACS
scheme simultaneously. In this case, the none and local keywords act the same.
Related command: radius scheme, hwtacacs scheme.
Example
# With 3com163.net as the current ISP domain, specify to adopt the RADIUS
scheme named 3com.
[3Com-isp-3com163.net] scheme radius-scheme 3com
# Specify the ISP domain named 3com to adopt the Scheme named rd, with Local
authentication as the secondary authentication Scheme.
[3Com-isp-3com] scheme radius-scheme rd local
# Specify the ISP domain named 3com to adopt hwtacacs-scheme hwtac
Scheme, with Local authentication as the secondary authentication Scheme.
[3Com-isp-3com] scheme hwtacacs-scheme hwtac local
private-group-id mode Syntax
standard

private-group-id mode standard

undo private-group-id mode standard
View
System view
Parameter
private-group-id: Specifies the way to represent the RADIUS attribute
private-group-id.
mode: Specifies the way to represent the RADIUS attribute private-group-id.
standard: Specify to code the RADIUS attribute private-group-id according to
RFC 2868.
Description
Use the private-group-id mode standard command to configure VLAN
delivering mode. A VLAN ID can be a string.