Portal Free-User - 3Com 8807 Command Reference Manual

376 C 22: P C C
HAPTER ORTAL ONFIGURATION OMMANDS

portal free-user

Syntax
In system view:
portal free-user mac mac-address ip ip-address vlan vlan-id interface
interface-type interface-number
undo portal free-user { mac mac-address | all }
In Ethernet port view:
portal free-user mac mac-address ip ip-address vlan vlan-id
undo portal free-user { mac mac-address | all }
View
System view, Ethernet port view
Parameter
mac mac-address: Sets the Mac addresses of authentication-free users.
ip ip-address: Sets the IP addresses of authentication-free users. These addresses
cannot be full-zero addresses, loopback addresses, multicast addresses or
broadcast addresses.
vlan vlan-id: ID of the VLAN that the authentication-free users belongs to, in the
range of 1 to 4094.
interface: Port of the switch that the authentication-free users lie in. This port
must belong to the VLAN that this command specifies.
interface-type: Port type, whose value is Ethernet or GigabitEthernet.
interface-number: Port number, expressed in the form of slot number/card
number/port number.
all: Deletes all authentication-free users.
Description
Use the portal free-user command to configure the Portal authentication-free
users.
Use the undo portal free-user command to delete the specified or all
authentication-free users.
In the network practice, you can configure network devices attached to the switch
or several servers as authentication-free users, so that they can access all networks
without authentication.
The information about authentication-free users includes IP addresses, MAC
addresses, and the connected switch ports and VLANs. Only the users who match
all the information can access networks without authentication.
c
CAUTION: