YASKAWA SGDH User Manual page 396

6 Wiring
6.4.8 DC Reactor for Harmonic Suppression
(2) Connecting a Reactor
Connect a DC reactor as shown in the following diagram. The DC reactor is connected in series to the rectifier
circuit's output side.
Note: 1. The SERVOPACK
ment. Remove the lead wire between these two terminals and connect the DC reactor with SER-
VOPACK.
2. DC reactor is an option (Provided by customer).
DC Reactor
Three-phase input
DC reactor
1 and 2 terminals for the DC reactor are short-circuited before ship-
6-32
SERVOPACK
1
2