Servopack Ratings And Specifications; Single-Phase 100 V; Single-Phase/Three-Phase 200 V - YASKAWA SGDH User Manual

4.1 SERVOPACK Ratings and Specifications

• Take appropriate measures to ensure that the input power supply is supplied within the specified voltage
range.
An incorrect input power supply may result in damage to the SERVOPACK. If the voltage exceeds these values, use
a step-down transformer so that the voltage will be within the specified range.

4.1.1 Single-phase 100 V

The value of the input power supply voltage is maximum 127 Vrms.
SERVOPACK Model SGDH-
Max. Applicable Servomotor
Capacity (kW)
Continuous Output Current
(Arms)
Max. Output Current (Arms)
Input Power
Supply
Configuration
Regenerative Processing

4.1.2 Single-phase/Three-phase 200 V

The value of the input power supply voltage is maximum 253 Vrms.
SERVOPACK A3A A5A 01A 02A 04A 05A 08A 10A 15A 20A 30A 50A 60A 75A 1AA 1EA
Model SGDH-
0.03 0.05
Max. Applicable
Servomotor
Capacity (kW)
0.44 0.64 0.91
Continuous Out-
put Current
(Arms)
1.3
Max. Output Cur-
rent (Arms)
Single-phase/Three-phase 200 to 230 VAC +10 to -15%, 50/60 Hz
Input Main
Power Circuit
Supply
Control Single-phase 200 to 230 VAC +10 to -15%, 50/60 Hz
Circuit
Configuration
Base-mounted (Rack mounting available as an option)
Regenerative External regenerative resistor
Processing
A3B
0.03
0.66
2.0
Main Circuit Single-phase 100 to115 VAC +10 to -15%, 50/60 Hz
Single-phase 100 to115 VAC +10 to -15%, 50/60 Hz
Control Circuit
Base-mounted (Rack mounting available as an option)
External regenerative resistor
0.1 0.2 0.4
2.1 2.8
2.0 2.8 6.5 8.5
4.1 SERVOPACK Ratings and Specifications
CAUTION
A5B
0.05
0.95
2.9
0.45 0.75 1.0 1.5 2.0
3.8 5.7 7.6 11.6 18.5 24.8 32.9 46.9 54.7 58.6 78.0
11.0 13.9 17 28 42
Built-in
4-3
01B 02B
0.1 0.2
2.4 3.0
7.2 9.0
3.0 5.0 6.0 7.5 11
56 84 110 130 140
Base-mounted (Duct-
ventilated available as an
option)
External regenerative
resistor
4
15
170