Table of Contents
Advertisement
Applications
3. Stop the appropriate script:
)> system script stop script1
>
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show script information
You can view status and statistics about location information from either the WebUI or the command
line.
Web
1. Log into the IX10 WebUI as a user with Admin access.
2. At the Status page, click Scripts.
The Scripts page displays:
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show scripts
> show scripts
Index
-----
0
IX10 User Guide
command at the system prompt:
Label
Enabled
-----------
-------
script1
true
Status
Run time
------
--------
active
Show script information
578
Advertisement
Table of Contents
