Create A Virtual Lan (Vlan) Route - Digi IX14 User Manual

Interfaces
192.168.2.194
ba:ba:2c:13:8c:71
192.168.2.195
09:eb:10:f0:bc:16
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Create a Virtual LAN (VLAN) route

Virtual LANs (VLANs) allow splitting a single physical LAN into separate Virtual LANs. This is useful for
security reasons, and also helps to reduce broadcast traffic on the LAN.
Required configuration items
Device to be assigned to the VLAN.
n
The VLAN ID. The TCP header uses the VLAN ID to identify the destination VLAN for the packet.
n
To create a VLAN:

WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Virtual LAN.
4. Type a name for the VLAN and click .
5. Select the Device.
IX14 User Guide
MTK-ENG-USER1 May 19 08:25:11 UTC 2021
MTK-ENG-USER2 May 20 11:32:12 UTC 2021
Local Area Networks (LANs)
Dynamic Yes
Dynamic Yes
147