Policy-Map; No Policy-Map; Policy-Map Rename; Service Commands - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Mode
Incompatibilities

policy-map

This command establishes a new DiffServ policy. The <policyname
alphanumeric string from 1 to 31 characters uniquely identifying the policy. The type of policy is
specific to the inbound traffic direction as indicated by the in parameter.
The policy type dictates which of the individual policy attribute commands are valid within
1.
the policy definition.
The CLI mode is changed to Policy-Map Config when this command is successfully executed.
1.
Format
Mode

no policy-map

This command eliminates an existing DiffServ policy. The <policyname
an existing DiffServ policy. This command may be issued at any time. If the policy is currently
referenced by one or more interface service attachments, this delete attempt fails.
Format
Mode

policy-map rename

This command changes the name of a DiffServ policy. The <
existing DiffServ class. The <
from 1 to 31 characters uniquely identifying the policy.
Format
Mode

Service Commands

The 'service' command set is used in DiffServ to define:
10-22
action {drop | set-prec-transmit <0-7> | set-dscp-
transmit <0-63> | set-cos-transmit <0-7> | transmit}]}
Policy-Class-Map Config
Drop, Mark (all forms)
policy-map <policyname> in
Global Config
no policy-map <policyname>
Global Config
parameter is a case-sensitive alphanumeric string
newpolicyname>
policy-map rename <policyname> <newpolicyname>
Global Config
202-10102-01, May 2005
parameter is a case-sensitive
>
parameter is the name of
>
is the name of an
policyname>
Quality of Service (QoS) Commands