Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
This set of commands consists of policy creation/deletion, class addition/removal, and
individual policy attributes.
Note: The only way to remove an individual policy attribute from a class instance
The CLI command root is
To enter "Config-policy-map" mode, use the
from Global Config mode.
To enter "Config-policy-classmap" mode, use the
"Config-policy-map" mode.
14.4.1 policy-map
This command establishes a new DiffServ policy. The
sensitive alphanumeric string from 1 to 31 characters uniquely identifying the policy. The
type of policy is specific to the inbound traffic direction as indicated by the in parameter.
Note: The policy type dictates which of the individual policy attribute commands
Note: The CLI mode is changed to Policy-Map Config when this command is
Format
Mode
14-18
within a policy is to remove the class instance and re-add it to the policy.
The values associated with an existing policy attribute can be changed
without removing the class instance.
policy-map
are valid within the policy definition.
successfully executed.
policy-map <policyname> in
Global Config
v1.0, February 2007
.
policy-map <policy-name> in
class <class-name>
<policyname>
Quality of Service (QoS) Commands
command
command from
parameter is a case-