Show Policy-Map - NETGEAR GSM7228PS Cli Manual

Term
DiffServ Admin mode
Class Table Size
Current /Max
Class Rule Table Size
Current /Max
Policy Table Size
Current /Max
Policy Instance Table
Size Current /Max
Policy Attribute Table
Size Current /Max
Service Table Size
Current /Max

show policy-map

This command displays all configuration information for the specified policy. The
<policyname> is the name of an existing DiffServ policy.
Format
show policy-map [policyname]
Mode Privileged EXEC
If the Policy Name is specified the following fields are displayed:
Term Definition
Policy Name The name of this policy.
Policy Type The policy type (Only inbound policy definitions are supported for this platform.)
The following information is repeated for each class associated with this policy (only those policy
attributes actually configured are displayed):
Term Definition
Assign Queue Directs traffic stream to the specified QoS queue. This allows a traffic classifier to specify
which one of the supported hardware queues are used for handling packets belonging to
the class.
Class Name The name of this class.
Quality of Service (QoS) Commands
Definition
The current value of the DiffServ administrative mode.
The current number of entries (rows) and the maximum allowed entries (rows) in
the Class Table.
The current number of entries (rows) and the maximum allowed entries(rows) in
the Class Rule Table.
The current number of entries (rows) and the maximum allowed entries(rows) in
the Policy Table.
Current number of entries (rows)
the Policy Instance Table.
Current number of entries (rows) and the maximum allowed entries(rows) in the
Policy Attribute Table.
The current number of entries (rows) i and the maximum allowed entries(rows) in
the Service Table.
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
and the maximum allowed entries(rows)
in
8-28