Class-Map; Class-Map Rename - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

14.3.1 class-map

This command defines a DiffServ class of type match-all. When used without any match
condition, this command enters the class-map mode. The
sensitive alphanumeric string from 1 to 31 characters uniquely identifying an existing
DiffServ class.
Note: The class-map-name 'default' is reserved and must not be used.
The class type of
for a packet to be considered a member of the class.
Note: The CLI mode is changed to Class-Map Config when this command is
Format
Mode
14.3.1.1 no class-map
This command eliminates an existing DiffServ class. The
of an existing DiffServ class ( The class name 'default' is reserved and is not allowed here).
This command may be issued at any time; if the class is currently referenced by one or
more policies or by any other class, the delete action fails.
Format
Mode

14.3.2 class-map rename

This command changes the name of a DiffServ class. The
name of an existing DiffServ class. The
sensitive alphanumeric string from 1 to 31 characters uniquely identifying the class (The
<class-map-name>
Format
Mode
14-10
indicates all of the individual match conditions must be true
match-all
successfully executed.
class-map match-all <class-map-name>
Global Config
no class-map <class-map-name>
Global Config
'default' is reserved and must not be used here).
class-map rename <class-map-name> <new-class-map-
name>
Global Config
v1.0, March 2006
<class-map-name>
<class-map-name>
<class-map-name>
<new-class-map-name>
Quality of Service (QoS) Commands
is a case
is the name
is the
parameter is a case-