Show Logging Buffered - NETGEAR GSM7228PS Software Administration Manual

ProSafe 7000 Managed Switch Release 8.0.3
a. Select Monitoring > Logs > Buffer Logs. A screen similar to the following displays.
b. Under Buffer Logs, for Admin Status, select the Enable radio button.
c. Click Apply.

Show Logging Buffered

The example is shown as CLI commands and as a Web interface procedure.
CLI: Show Logging Buffered
(Netgear Switch Routing) #show logging buffered ?
<cr> Press Enter to execute the command.
(Netgear Switch Routing) #show logging buffered
Buffered (In-Memory) Logging
Buffered Logging Wrapping Behavior
Buffered Log Count
<1> JAN 01 00:00:02 0.0.0.0-0 UNKN[268434944]: usmdb_sim.c(1205) 1 %% Error 0 (0x0)
<2> JAN 01 00:00:09 0.0.0.0-1 UNKN[268434944]: bootos.c(487) 2 %% Event
(0xaaaaaaaa)
<6> JAN 01 00:00:09 0.0.0.0-1 UNKN[268434944]: bootos.c(531) 3 %% Starting code...
<6> JAN 01 00:00:16 0.0.0.0-3 UNKN[251627904]: cda_cnfgr.c(383) 4 %% CDA: Creating new
STK file.
<6> JAN 01 00:00:39 0.0.0.0-3 UNKN[233025712]: edb.c(360) 5 %% EDB Callback: Unit Join:
3.
<6> JAN 01 00:00:40 0.0.0.0-3 UNKN[251627904]: sysapi.c(1864) 6 %% File user_mgr_cfg:
same version (6) but the sizes (2312->7988) differ
: enabled
: On
: 66
Chapter 17. Syslog | 297