Logging Host Remove; Logging Port; Logging Syslog - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

18.3.5 logging host remove

This command disables logging to host. See
page 18-25 for a list of host indexes.
Format
Mode

18.3.6 logging port

This command sets the local port number of the LOG client for logging messages. The
can be in the range from 1 to 65535.
<portid>
Default
Format
Mode
18.3.6.1 no logging port
This command resets the local logging port to the default.
Format
Mode

18.3.7 logging syslog

This command enables syslog logging.
Default
Format
Mode
18.3.7.1 no logging syslog
This command disables syslog logging.
Format
Mode
System Maintenance Commands
Section 18.3.10 "show logging hosts" on
logging host remove <hostindex>
Global Config
514
logging port <portid>
Global Config
no logging port
Global Config
disabled; local0
logging syslog
Global Config
no logging syslog
Global Config
v1.0, December 2005
18-23