To Install The 16442A/B Test Fixture - Agilent Technologies 4155C User Manual

Installation
Installing Accessories

To Install the 16442A/B Test Fixture

Before performing this procedure, turn off the 4155C/4156C and 41501A/B.
When you use the 16442A/B test fixture without the 16441A R-box or the 16440A
selector, you can stabilize the 16442A/B as shown in the figure below.
1. Put a stabilizer on both sides of the test fixture.
2. Attach each stabilizer to the unit with a flathead screw.
Agilent 4155C/4156C User's Guide Vol.1, Edition 11 2-13