To Reset 4339B To Its Default Settings; To Connect Test Fixture; 16008B Resistivity Cell - Agilent Technologies 4339B User Manual

To Reset 4339B to its Default Settings

1. Press to select the reset menu.
2. Press until
Yes
For more information about the default settings, see \Default Settings" later in this chapter.

To Connect Test Fixture

Connect the test xture to the UNKNOWN terminals as follows:
Do
Warning
not
when the High Voltage indicator is ON, the 4339B outputs dangerous
voltage of up to 1000 Vdc. Before handling the 4339B or the accessory,
turn OFF the test voltage pressing
indicator is OFF.

16008B Resistivity Cell

The 16008B is used to measure the volume or surface resistance/resistivity of insulation
materials.
Three size electrodes are available. For detail see \Accessories Available" later in this chapter.
2-2 Operating the 4339B
blinks, and press .
touch the UNKNOWN terminals or the electrodes of the accessory,
and con rm that the High Voltage
4339B