Load Test With Pi Test Fixture (Load Test); Required Equipment; Procedure; Load Test With Pi Test Fixture Setup - Agilent Technologies E4915A Service Manual

11. Load Test with PI Test Fixture (LOAD TEST)

Required Equipment

PI-Network Test Fixture
BNC(m)-BNC(m) Cable, 30 cm

Procedure

1. Connect the equipment as shown in Figure 2-13.
2. Select \LOAD TEST" and click
3. Following the program instructions, complete the procedure.
2-20 Adjustments and Performance Tests
41900A
PN 8120-1838, 2 ea
Figure 2-13. Load Test with PI Test Fixture Setup
NNNNNNNN
OK in the list box of the program display.