Table of Contents
Advertisement
4
Measurement Software
Specifying Assets for the Confidence Test
The next task is to specify the system assets in order to run a confidence
test. This measurement tests the Agilent N5500A Test Set's low- noise
amplifier circuitry.
1
.
E5500_server_hardware
04 Apr 04 rev 1
Figure 12 Navigate to server hardware connections
2
3
36
From the System menu, select Server Hardware Connections. See
Figure
12.
In the Server Hardware Connections dialog box, select the General
Assets tab (see
Figure 13
Select N5500A/70420A from the Test Set pull- down list. (It may
already be selected.)
a
A green check- mark appears after an automatic I/O check has been
successfully performed by the software (see
nothing happens, click the Check I/O button to manually initiate the
check.
on page 37).
Figure 13
on page 37). If
E5505A Installation Guide
Advertisement
Table of Contents
