Using the Trigger Menu
Specifying a Basic Trigger
Specifying a Basic Trigger
The default analyzer triggers are
While storing "anystate" TRIGGER on "a" 1 time
Store "anystate"
for state analyzers and
TRIGGER on "a" > 8 ns
for timing analyzers. If you want to simply record data, these will get
you started. They can quickly be tailored by specifying a particular
pattern to look for instead of the general case.
Customizing a trigger generally requires these steps:
• Assign terms.
• Define the terms.
• Change the trigger to use the new terms.
HP 1660ES-series
The oscilloscope can be used in complex triggering sequences
managed by the logic analyzer, but its inherent trigger mechanism is
much simpler. Using the oscilloscope in conjunction with one or both of
the analyzers is covered in "Arming and Additional Instruments" in this
chapter.
75